(937) 746-8388
Home
About Us
Products
Vanity Tops
>
Diamond Bowl
Octagon Bowl
Oval Bowl
Redondo Bowl
Semi-Square Bowl
Shell Bowl
Ventura Bowl
Wave Bowl
Tub & Shower Walls
Tub Decks
Shower Bases
>
Shower Bases: 36" x 36"
Shower Bases: 48" x 36"
Shower Bases: Water Dams & Curbing
Accessories
>
Recessed Soap Dish
Corner Soap & Shampoo Caddy
Recessed Soap & Shampoo Caddy
Deluxe Recessed Soap & Shampoo Caddy
Shower Seat
Decorative Edges
Colors
Order Forms
Warranty
Care
Installation
Contact Us
FAQs
Vanity Tops
A standard top
Is a standard length - 25, 28, 31, 37, 43, 49, 61 for single bowl and 61 or 73 for double bowls.
Has a centered bowl or standard placement for double bowls.
Is 22" depth for all the above lengths or 19" for 25, 31, 37, 43, or 49 length tops.
Is open at both ends.
Is a total height of 4 ¾" at the attached backsplash and ¾" at the front edge.
Can be cut to fit against a wall or between walls for a charge.
Has any choice of faucet hole drillings.
Has square finished corners. Is one of our colors.
Can be matte finish.
3/4" thick edge.
Has a bowl that is the same color as the top.
A custom top
Is a top that does not meet the requirements of a standard top.
Is a non-standard length. Has an off-center bowl, no bowl, two or more bowls, or cutout for drop-in bowl.
Depth depends on bowl design.
Has an attached end splash.
Has no backsplash, a loose backsplash, or an attached backsplash that is less than 4 ¾" from the bottom of top.
Has any clips, radii, or other special shapes such as banjo or angles.
Customizable.
Has a bullnose or decorative edge.
Has a different color bowl from the deck (two tone).
Colors
Decorative Edges
Bowl Styles
For tops that have a depth of 19"
Redondo
Wave
Small oval
Small semi-square
Small shell
For tops that have a depth of 22" - 25"
Redondo
Wave
Large oval
Large semi-square
Large shell
Ventura
Diamond
Octagon