Vanity tops
Bowl Styles
| Small | Medium | Large |
|---|---|---|
Standard top |
Custom topIs a top that does not meet the requirements of a standard top |
Is a standard length - 25, 28, 31, 37, 43, 49, 61 for single bowl and 61 or 73 for double bowls. Has a centered bowl or standard placement for double bowls. |
Is a non-standard length. Has an off-center bowl, no bowl, two or more bowls, or cutout for drop-in bowl. |
| Is 22" depth for all the above lengths or 19" for 25, 31, 37, 43, or 49 length tops. | Depth depends on bowl design |
Is open at both ends. |
Has an attached end splash. |
| Is a total height of 4 ¾" at the attached backsplash and ¾" at the front edge. | Has no backsplash, a loose backsplash, or an attached backsplash that is less than 4 ¾" from the bottom of top. |
Can be cut to fit against a wall or between walls for a charge. |
Has any clips, radii, or other special shapes such as banjo or angles. |
Has any choice
of faucet hole drillings. Has square finished corners.· Is one of our colors. Can be matte finish. |
Customizable |
| 3/4" thick edge | Has a bullnose or decorative edge. |
| Has a bowl that is the same color as the top. | Has a different color bowl from the deck (two tone). |